does anyone know of a good plumber in newcastle area

General club enquiries, talk about any subject you like.

Moderator: Club Moderators

Post Reply
User avatar
GlennP
Regular
Posts: 863
Joined: Fri Dec 12, 2008 11:21 am
Location: NE England

does anyone know of a good plumber in newcastle area

Post by GlennP »

I need to get my shower fixed ( not electric) but would rather give someone i know the work or at least someone who comes recommended as opposed to trawling through the yellow pages.

The shower is an Elsan. Probably 10 years old or so.

If anyone has a regular plumber they use and would be happy to recommend them that would be much appreciated.

Thanks,

Glenn
You are only as good as your last flight........
User avatar
ron freeman
Seasoned
Posts: 3147
Joined: Wed Dec 21, 2005 10:50 pm
Full Name: Ron Freeman CFI
Location: Cheviot hills, Northumberland
Contact:

Neil Smith

Post by ron freeman »

Neil Smith (NHPC member & self employed plumber) he was on East hill (Friday) flying his new Ozone Delta, I'm sure he will do you a good price + a pint or two.
:wink:
Maximise your time & dosh do both Hanggliding & Paragliding :)
User avatar
Neil
Chatty
Posts: 435
Joined: Sun Apr 16, 2006 12:51 am
Full Name: Neil Smith
Location: South Shields

Post by Neil »

see if you can get a service kit for it try crosslings on the coast rd
or the internet. If its a thermostatic mixer shower you will need the kit.
what is the problem with it?
never waste a hard on and don't trust a fart
User avatar
GlennP
Regular
Posts: 863
Joined: Fri Dec 12, 2008 11:21 am
Location: NE England

shower

Post by GlennP »

aye its an elsan with a large on-off mixer tap. i was switching it off last night and heard a click and then it wouldnt turn off at all. the splines on the brass mixer tap shaft and the white plastic control tap are buggered but its been getting harder and harder to turn on and off recently.

theres a very small adjustment screw under the brass screw with the o ring that i had to turn back as at one time it only put out cold/cool water.

dont know where the stop taps are to it so i could fit a service kit though.

its a pain as our landlord is 6000 miles away. might have to do it meself afterall.

can you suggest anything neil?
You are only as good as your last flight........
User avatar
Neil
Chatty
Posts: 435
Joined: Sun Apr 16, 2006 12:51 am
Full Name: Neil Smith
Location: South Shields

Post by Neil »

sound like you need a new mixer shower
send me a picture
never waste a hard on and don't trust a fart
will walker
Mingling
Posts: 15
Joined: Tue Sep 09, 2008 6:52 pm
Location: Jarrow

Post by will walker »

Hi iv'e got a brand new mixer shower £20 if you want it , got it with cubicle package but didn't need it . its a wickes No 160395 :)
User avatar
GlennP
Regular
Posts: 863
Joined: Fri Dec 12, 2008 11:21 am
Location: NE England

shower

Post by GlennP »

here are a few pics. The splines on both the tap and the brass shaft are knackered and the whole mechanism is pretty stiff. Fnarr Fnarr!

Do crosslings sell to the public? Just up the coast road from me so pretty handy really if they do.
Attachments
shower1.jpg
shower1.jpg (46.75 KiB) Viewed 5204 times
You are only as good as your last flight........
User avatar
GlennP
Regular
Posts: 863
Joined: Fri Dec 12, 2008 11:21 am
Location: NE England

pics

Post by GlennP »

more pics
Attachments
neilebay.jpg
neilebay.jpg (65.6 KiB) Viewed 5201 times
You are only as good as your last flight........
User avatar
GlennP
Regular
Posts: 863
Joined: Fri Dec 12, 2008 11:21 am
Location: NE England

last one

Post by GlennP »

last pic
Attachments
shower3.jpg
shower3.jpg (48.36 KiB) Viewed 5199 times
You are only as good as your last flight........
User avatar
GlennP
Regular
Posts: 863
Joined: Fri Dec 12, 2008 11:21 am
Location: NE England

mixer shower

Post by GlennP »

might take you up on the offer will if i cant sort it with a service kit.

cheers

glenn
You are only as good as your last flight........
will walker
Mingling
Posts: 15
Joined: Tue Sep 09, 2008 6:52 pm
Location: Jarrow

Post by will walker »

Forgot to put fone No 07910727521 :(
Post Reply